Along with all the revolving of cylinder

The wet materials are transported into the material hopper by the belt conveyor and bucket lift, and gets into the feeding terminal through feeding pipe using the aid of feeder of material hopper. The pitch of the feeding pipe should certainly be over the natural pitch of materials in order to help the materials flow into the drying machine with success. The fluidized spray dryer is usually a rotary cylinder which happens to be oblique to some extent. The materials are fed from the comparatively higher terminal, heat carrier comes in from the lower terminal, and sometimes the heat carrier and materials get into the cylinder together fluid bed dryer. Along with all the revolving of cylinder, the materials move to the lower terminal due to the gravity. When the wet materials move ahead, it receives the heat from the heat carrier directly or indirectly. So, the wet materials are dried, and discharged out by belt conveyor or screw conveyor on the outlet. There may be shoveling plate inside the cylinder in order to shovel materials up and cast it out, to boost the connection surface, to promote drying efficiency, and accelerate the forward movement of materials. Frequently, the heat carrier can be hot air and chimney flue. After the heat carrier is dried, the materials mingled with air really should be collected with cyclone dust collector. If there's require to reduce the content of dust mixed with tail gas, the heat carrier might be subject to bag dust collector or wet dust collector before it truly is discharged.Far a lot more Info Click on : freeze dryer machine